G Test for Brampton Route

1. From parking lot, turn left onto First Gulf Blvd.

2. Turn right at Steeles Ave E. (note: there is no yield sign here so proceed without stopping if there are no pedestrians attempting to cross. Many people stop/slow down here because they are accustomed to yield signs at this type of intersection. You will lose points for stopping)

3. Enter highway 410 North (note: the entry lane to the highway is continuous and does not end, so focus on picking up the speed rather than changing lanes. Change lanes only if examiner asks you to)

4. Exit highway, making a left at Clarke Blvd. (note: This road only has a 50 km/h speed limit, however, you will not see the speed limit signs posted because you will enter highway 410 South very shortly, so its a very small stretch of road. If you do 60 km/h on this road, the examiner may automatically fail you, as per their regulations).

5. Turn right entering highway 410 South

6. Exit highway, making a right hand turn at Steeles Ave. W.

7. Turn right onto Kennedy Rd. S

8. Turn left onto Tullamore Rd., which is marked by a pedestrian crossing (entering residential roads, drive accordingly).

9. Turn left onto Bartley Bull Pkwy.

10. Turn left onto Orchard Dr.

11. Turn left onto Steeles Ave. W.

12. Turn right onto First Gulf Blvd.

13. Turn right onto Test Center parking Lot.

Extra notes: 1. At this test center, there is no reverse/bay parking as far as I can tell

2. The parallel is pretty easy because its done between two tall cones and the best part is that the Test Center leaves those cones there 24/7 for you to practice on. Just get the car reasonably deep between the cones, without hitting the curb.

3. You may do parallel parking at the beginning of the test or at the end, depending on the amount of vehicles that are using the cones at that time.